C960 2K FAQ
1. What's in the box of EMEET Webcam C960 2K?
It contains an EMEET SmartCam C960 2K Webcam, a privacy cover, and a user manual.
2. Device display of EMEET C960 2K
3. What is TOF focusing?
TOF focusing is a camera technology that uses Time of Flight (TOF) imaging to measure the distance between the camera and the subject being photographed. This enables more accurate autofocus and better low-light photography.
4. What is the difference between TOF focusing and automatic focusing?
TOF focusing and automatic focusing have some differences. Automatic focusing is a technology that uses the camera lens to measure the focus in the photo and adjusts the camera's focus distance automatically to make the focus clear based on the measurement result.
TOF focusing uses time-of-flight camera technology to calculate the distance to the object, and when adjusting the focus, it prioritizes the distance to the object, so it can focus more accurately.
In addition, TOF focusing can work better in low-light environments because it does not rely only on visible light.
5. How do I use a USB Webcam?
- Turn on
Plug the USB-A connector into your computer, the device will automatically turn on.
Then open the software you want to use, and select the EMEET device. The device status indicator will turn blue.
- Turn off
Exit the meeting software, the camera will turn off.
Unplug the USB connector from your computer or laptop, the device will automatically turn off.
- Plug-and-play supports your computer to recognize the webcam immediately.
- Note:
If your computer does not instantly recognize the webcam, please check if the following tips can resolve the issue:
Check if the device has been selected on your meeting software.
Try plugging into a different USB port or restarting the computer.
6. How to install the device on a tripod?
- Look for a 1/4 threaded hole in the bottom of the camera.
- Twist the webcam and tripod together until they are snugly joined.
- Place your webcam with the tripod anywhere you desire in the best position to frame yourself.
7. How to install the device on the PC?
- Place your webcam on a computer, laptop, or monitor in a position you desire.
- Unfold the universal clip so it fits the top of your monitor or laptop screen.
- Manually adjust the webcam up/down to the best position to frame yourself.
8. How to adjust the camera picture parameters?
Please connect the device to the computer and follow the steps below:
- Connect the device to the computer via the attached USB cable.
- Download EMEETLINK PC software and turn it on.
- In this interface, you can set the power line frequency (anti-flicker) according to your needs, adjust the brightness, contrast, sharpness, saturation, and white balance.
- If you want to restore all settings, just click the "Restore defaults" button.
9. Does the EMEET C960 2K have software?
The EMEET SmartCam C960 2K Webcam will be automatically installed when you connect it to a computer.
No additional software is required.
You will need to open camera software such as Quick Time, Photo Booth, Skype or Face Time to start streaming the video.
10. How to protect my privacy?
The webcam has an incidental protective privacy cover in the box, which you can use to block the lens when it's not in use.
This guarantees nobody will be able to record video of you while the camera is plugged in.
Please follow the steps below to install it:
- Wipe the front of the webcam.
- Tear off the tape on the cover.
- Paste the cover onto the front of the webcam.
- Press and hold the cover firmly for 3s.
11. Why change the Anti-flicker frequency?
Different areas have different power frequencies in order to avoid anti-flicker. The C960 2K Webcam has two power-line frequencies, which are 50Hz and 60Hz. You can switch the power-line frequency in the settings through eMeetLink software.
In general, the frequency should be adjusted to 60Hz in the United States. The Chinese mainland, Japan, Singapore, and Europe are transferred to 50Hz, with Japan's Kanto to 50HZ, Kansai to 60HZ.